Tuesday, September 25, 2018
Lucifer Furnaces supplies metal stamping manufacturer with furnace/oven combo
Lucifer Furnaces delivered a large dual chamber
unit to a metal stamping manufacturer in the Midwest. Model HL82-P24 is a hardening furnace over
tempering oven, built as a space saving combination for multipurpose heat
treating. The upper hardening chamber
heats to 2300°F with 6.5” multilayer insulation throughout the chamber. Heat is supplied through heavy gauge, coil
wound wire elements in easy-to-replace holders on sides, back and door of the
furnace. The vertical lift, hand-crank
operated door provides for smooth operation with a tight seal. A heavy duty ceramic hearth plate protects
floor elements and insulation. The lower
chamber tempering oven heats to a uniform 1200°F with a rear mounted high cfm fan
circulating air past the side mounted heating elements. A 16 gauge stainless steel liner forms the
work chamber. Both chambers are
controlled with digital time proportioning temperature controllers with timers
and alarms. Safety features on this unit
include high limit controllers on each chamber which provide auto shut-down in
the event of a high temp excursion. Door
switches are designed to shut off power and fan, protecting users from electric
shock as well as heat hazards. Both chambers are 18” high x 24” wide x 24”
long.
Tuesday, April 24, 2018
Lucifer Furnaces builds Dual Chamber Furnace for Punch
& Die Manufacturer
Thursday, March 8, 2018
Lucifer Furnaces delivers custom Box Furnace for
precision metal stamping operation
Lucifer
Furnaces has delivered a general purpose box furnace to a manufacturer of
precision metal stampings in the Midwest, USA.
Model HL7-M24 has chamber dimensions of 12”H x 18”W x 24”D and heats to
2300°F. Powered at 15 KW, heat is supplied through easy-to-replace coil wired
heavy duty heating elements in V grooved radiant panels on sides, back and door of the furnace.
Insulation includes 5” of hot faced insulating firebrick with cold faced
mineral wool block behind. The roof is
lined with ceramic fiberboard to eliminate cracking potential. A 1” thick cast hearth plate protects floor
insulation and provides a flat work surface.
This furnace was customized with an air operated vertical lift door
activated via foot treadle enabling the door to raise to any height. Safety features include a microswitch to
auto-disengage power to heating elements when door is opened. Temperature is controlled with a Honeywell
digital time proportioning temperature controller supplemented with an overtemp
controller to guard against high limit excursions. Other special features include 3 timers -a
Soak Timer for regular timing functions, an Input Timer for lower temp
operation and a 7 Day Timer for auto furnace start up/shutdown. The furnace will be used to heat treat D2 and
A2 steel under air atmosphere. This furnace is part of Lucifer’s standard,
general purpose, Series 7000 box furnace lines.
Monday, October 16, 2017
Lucifer Furnaces customizes box furnace for extra heavy loads for auto
safety products manufacturer
Lucifer
Furnaces, Warrington PA, has designed a furnace to meet the heavy loads of a
supplier of automotive safety equipment. Model DL7-R24, a box furnace with a
chamber size of 24”H x 24”W x 24”L was customized to support a 1000 lb. load of
molds for heat treating at 750°F. Starting
with a reinforced angle iron steel frame with heavy gauge sheet steel facing
welded to form a rigid unit, the furnace is lined with 6 ½” insulating
firebrick and mineral wool block on side walls and below hearth. Ceramic fiber pyroblock modules line the
roof. Coiled wire heating elements in
easy-to-replace holders are located on both side walls as stacked arrays. A special 1 ½” thick hearth plate was
designed to sit atop heavy-duty piers to support the load, protect the floor
insulation and provide a flat working surface. Safety features onboard include
an auto-disengage feature to shut off power to heating elements when door is
opened to eliminate electric shock hazard.
Controls include Honeywell DC2500 microprocessor based digital time-proportioning
temperature controller programmed with a single setpoint heat ramp. The furnace, part of Lucifer’s Series 7000
general purpose box furnaces, will be used for annealing steel and stress steel
relief of die cast tool.
Friday, August 25, 2017
Have you replaced your thermocouple lately?
Your furnace environment is wearing on your thermocouple,
and a failed thermocouple can shut down production. Don’t risk losing your product – and losing
revenue. Don’t put your production
schedule on hold. Replacing a
thermocouple is easy and inexpensive.
Great idea to keep a spare in your shop!
Thermocouple failure happens – they get damaged, sheaths
fail, they short out. Contamination,
corrosion, oxidation can all occur from normal heat treating.
Remember, your thermocouple tells your controller how much
heat to supply to your product in the chamber.
Keep your product safe! Keep your
furnace from melting down! Replace that
old thermocouple today!
Friday, August 18, 2017
US Auto Parts Manufacturer
orders Lucifer Fiber Lined Box Furnace
Lucifer Furnaces, Inc. received an order for an
electric ceramic fiber lined box furnace from a leading US stamping manufacturer
of automotive products. Model LI7-M18, with
a chamber size of 12” W x 18” L x 18” H, quickly heats to a uniform 2200°F. A hotface of 2” ceramic fiber insulation with
3” coldface mineral wool block insulation around the entire chamber maximizes
heating efficiency with low power input.
Ceramic Fiber insulation, with low heat storage and low thermal
conductivity combined with high thermal shock resistance, allows faster heat
up/cool down cycles, reducing wait times between loads resulting in increased
production. Heavy gauge coil wound
Kanthal A1 iron-chromium-aluminum wire heating elements are supported on
ceramic rods effecting rapid heat up.
Elements, mounted on both side walls, can be easily replaced
individually, savings costs. A 1” thick
hearth plate protects the floor insulation and supports up to 40 lbs. per
square foot of hearth area. Temperature
is monitored by a rear mounted Type K thermocouple and regulated by a Honeywell
DC2500 microprocessor based digital time proportioning temperature controller. An insulated horizontal swing door with a
tight seal comes standard with safety switch. Ceramic Fiber lined furnaces are
general purpose box furnaces for batch heat treating in air atmosphere. Tuesday, August 1, 2017
August 1st – Schools are getting ready to start
the cycle of educating the next generation.
Lucifer Furnaces is a leader in providing technical schools,
universities, and high schools throughout this great county with economical
heat treating furnaces and ovens.
Popular models for educational purposes include the space saving dual
chamber RD8 and 8000 series with hardening furnace above tempering oven.
Single chamber high temp furnaces or tempering ovens are
also in high demand in schools and universities.
Custom built to your specifications, Lucifer Furnaces will design
your heat-treating equipment with horizontal or vertical lift door, optional
overtemp safety system, a variety of controllers, recorders, soak timers,
etc... Quench tanks, gloves and foil
wrap are also available.
Lucifer Furnaces supports STEM education by providing a
variety of affordable, customized heat treating furnaces & ovens for an
excellent introduction to metallurgy.
Plus, we have great shirts, mugs and aprons! Check into a Lucifer: www.luciferfurnaces.com
Subscribe to:
Posts (Atom)








